Hey, no offense, but your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is among nature’s most erosive substances. Moisture seeps in and ends up being trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, wet environment is best for mold and mildew and other kinds of stinky stuff.
If moisture has permeated even more into the plastic wrapped foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, but also make the cover really hard to remove, and not as efficient at keeping the heat in the spa. Time for a better kind of Swim Spa Cover
Stinky Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or used spots, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining pipes off properly, will ultimately begin to puddle water, which is most likely time to buy a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also problem, and although you can ward off the inescapable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can stand up to longer periods, but it’s an excellent practice to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to escape do so, however do not remove delicate foam panels unless absolutely needed.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, however it won’t stop moisture effectively. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the extreme moisture from your spa from reaching the foam core. The only real service is a Swim Spa Cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not stunned frequently enough, bacteria and algae can benefit from a congenial environment to grow. Low pH, high chlorine or high ozone levels can also deteriorate the underside of your Swim Spa Cover cover. Since the cover is so near to the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry but this is simply BS) The reality is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roof at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times annually, so that it always looks great, and is secured from the elements. Once again, this really isn’t going to stop the mold and mildew from growing inside a foam cover However it will help your spa dealership pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Fix Your Swim Spa Cover!
• Remove to Safe Location: This first step might seem apparent, but you require a good location to permit the cover to sit undisturbed from family pets, wild animals, and winds. It should be a sunny place if possible, or a dry indoor area with low humidity can likewise be utilized.
• Deodorize & Disinfect: You might not have to do both, it’s best to be as gentle as possible. Do not use home cleaning products on your Swim Spa Cover, odd chemicals can end up in your spa water. Gently tidy all outside surface areas with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, because the panels might end up being harmed throughout removal or cleansing. However if you identify that there is something slimy inside, you can usually unzip and remove the panel for a cleansing inside and out.
How frequently does your spa dealership anticipate you to do all this? If your swim spa is protected from a lot of sun and rain, twice annually. If it’s out in the open it ought to be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The easiest treatment for a foul-smelling Swim Spa Cover is to simply purchase a various kind of Swim Spa Cover A foul-smelling swim spa cover just implies that your cover is taking on wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has sealed air chambers instead will prevent offering the mold and mildew a place to grow in the first place.